|
Отправлено: 10.11.08 08:12. Заголовок: Permeability-porosity relationships in seafloor vent deposits: Dependence on pore evolution processe
JOURNAL OF GEOPHYSICAL RESEARCH, VOL. 112, B05208, doi:10.1029/2006JB004716, 2007 Permeability-porosity relationships in seafloor vent deposits: Dependence on pore evolution processes Wenlu Zhu Department of Geology and Geophysics, WHOI, Woods Hole, Massachusetts, USA Margaret K. Tivey Department of Marine Chemistry and Geochemistry, WHOI, Woods Hole, Massachusetts, USA Hilary Gittings Department of Geology and Geophysics, University of Wisconsin-Madison, Madison, Wisconsin, USA Paul R. Craddock Department of Marine Chemistry and Geochemistry, WHOI, Woods Hole, Massachusetts, USA Abstract Systematic laboratory measurements of permeability and porosity were conducted on three large vent structures from the Mothra Hydrothermal vent field on the Endeavor segment of the Juan de Fuca Ridge. Geometric means of permeability values obtained from a probe permeameter are 5.9 Ўї 10−15 m2 for Phang, a tall sulfide-dominated spire that was not actively venting when sampled; 1.4 Ўї 10−14 m2 for Roane, a lower-temperature spire with dense macrofaunal communities growing on its sides that was venting diffuse fluid of <300ЎЖC; and 1.6 Ўї 10−14 m2 for Finn, an active black smoker with a well-defined inner conduit that was venting 302ЎЖC fluids prior to recovery. Twenty-three cylindrical cores were then taken from these vent structures. Permeability and porosity of the drill cores were determined on the basis of Darcy's law and Boyle's law, respectively. Permeability values range from Ў-10−15 to 10−13 m2 for core samples from Phang, from Ў-10−15 to 10−12 m2 for cores from Roane, and from Ў-10−15 to 3 Ўї 10−13 m2 for cores from Finn, in good agreement with the probe permeability measurements. Permeability and porosity relationships are best described by two different power law relationships with exponents of Ў-9 (group I) and Ў-3 (group II). Microstructural analyses reveal that the difference in the two permeability-porosity relationships reflects different mineral precipitation processes as pore space evolves within different parts of the vent structures, either with angular sulfide grains depositing as aggregates that block fluid paths very efficiently (group I), or by late stage amorphous silica that coats existing grains and reduces fluid paths more gradually (group II). The results suggest that quantification of permeability and porosity relationships leads to a better understanding of pore evolution processes. Correctly identifying permeability and porosity relationships is an important first step toward accurately estimating fluid distribution, flow rate, and environmental conditions within seafloor vent deposits, which has important consequences for chimney growth and biological communities that reside within and on vent structures. Received 25 August 2006; accepted 4 December 2006; published 12 May 2007.
|